Primedic M240 DM1 Defibrillator Display Rear Cover

Quick Detail:

The defibrillator housing includes a front cover and a back cover. The front cover is snap-connected with the back cover. The back cover is provided with a handle housing. The handle housing is provided with two defibrillation handles. One end of the defibrillation handle is located on the In the handle housing, there are two receiving grooves at the top of the handle housing. The defibrillating handle is placed in the receiving groove respectively, and the bottom end of the defibrillating handle is adsorbed in the receiving groove; the defibrillating handle includes an upper cover of the handle and a lower handle. cover, children's electrodes, adult electrodes and electrode wires. The upper cover of the handle is snap-connected to the lower cover of the handle. The children's electrodes and the adult electrodes are connected to the lower cover of the handle in turn. The electrode wires are electrically connected to the children's electrodes and the adult electrodes respectively. The electrode wires An electrode plug is connected to one end, a battery is provided in the front cover and the back cover, and the defibrillation handle is connected to the battery.

► Working principle

A battery charging interface is fixed on the side of the back cover, and the battery charging interface is electrically connected to the battery. A charger fixed cover is provided on one side of the battery charging interface, and the charger fixed cover is fixedly connected to the back cover.

The size of the back cover is 43.2*17.2*37.7cm. It is made of impact-resistant and waterproof material, which very well protects the original electronic equipment inside. When you carry it out, the outer shell can protect the machine well and allow the machine to be used normally.

A housing for defibrillator electrode pads that protects the electrode pads prior to use and maintains the electrode pads in an electrically connected or electrically disconnected configuration. Inside the case there are spring contacts on opposite sides that hold the plate and release pad in place when the case is closed and the electrical conductors remain in contact with each other to maintain their connection to each other.

features:

About delivery:

We default to express delivery by DHL. We will contact you as soon as possible when sending express delivery. If you have any questions after receiving the express delivery, please feel free to contact us at any time.

Metrax Primedic M240 DM1 Defibrillator Display Rear Cover ，Impact-resistant and waterproof material Images